P9RA+

• Front-End RF Filtering
  –3 dB at 30.5 MHz from the center frequency of each band
• Active RF Gain Control
  31 dB
• RF Sensitivity
  at 20 dB SINAD
  2.2  µV
• Image Rejection
  >90 dB
• Adjacent Channel Rejection
  >70 dB
• Latency
  0.37ms
• Squelch Threshold
  22 dB
  SINAD (±3 dB)
• Intermodulation Attenuation
  >70 dB
• Blocking
  >80 dB
• Audio Output Power
  1kHz @ 1% distortion, peak power, @16Ω
  100 mW (per output)
• 4-band Parametric EQ
  9.5 Ω

High Boost

• Volume Limiter
  Selectable: OFF (0 dB)
  to -48  dB in 3 dB steps
• Volume Lock
  Selectable: 0  dB
  to -70  dB
• Net Weight
  154 g (Without Battery)
• Dimensions
  83 x 65 x 22 mmH x W x D
• Battery Life
  4–6 hours (continuous use) AA batteries

P9TE

• RF Output Power
  Selectable: 10, 50, 100 mW (regionally dependent)
• RF Output Impedance
  50 Ω (typical)
• Net Weight
  850 g
• Dimensions
  197 mm x 166 mm x 42 mm (7.75in X 6.55in X 1.65in)
• Power Requirement
  415 mA typical @ 120VAC (with RF on 100 mW power mode, no audio)

Audio Input

• Connector Type
  Combination XLR and 6.35 mm (1/4”) TRS
• Polarity
  XLR: Non-inverting (pin 2 positive with respect to pin 3)
  6.35 mm (1/4”) TRS: Tip positive with respect to ring
• Configuration
  Electronically balanced
• Impedance
  70.2 kΩ (actual)
• Nominal Input Level
  Switchable: +4 dBu, –10 dBV
• Maximum Input Level
  +4 dBu: +23.3 dBu
  –10 dBV: +12.5 dBu
• Pin Assignments XLR: 1=ground, 2=hot, 3=cold
  6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground
• Phantom Power Protection
  up to 60 V DC

Audio Output

• Connector Type
  6.35 mm (1/4”) TRS
• Configuration
  Electronically balanced
• Impedance
  Connected directly to inputs