| Maximum output power |
500W + 500W (4ohms),
370W + 370W (8ohms/ AC100V model)
350W + 350W (8ohms/ AC120V model)
320W + 320W (8ohms/ AC220-240V model)
@1kHz, THD+N≤0.5% |
Total harmonic distortion
(THD+N) @ 20-20kHz |
Less than 0.3%, +14dBu output into 600ohms |
Frequency response
GAIN=Minimum, PAD=OFF |
0, +0, -3dB, 20Hz-20kHz, 0dB @1kHz |
Equivalent input noise
GAIN=Maximum, 20-20kHz |
-128dBu |
Crosstalk
@ 1kHz |
-68dB, adjacent inputs |
| -68dB, input to output |
| Phantom voltage |
+48V on CH1-6,7/8,9/10 |
Channel equalizer
+15,-15dB Maximum |
HIGH: 10kHz (Shelving) |
| MID(MONO): 250Hz-5kHz (Peaking) |
| MID(ST) 2.5kHz (Peaking) |
| LOW: 100Hz (Shelving) |
| Channel peak indicator |
LED turns on when post EQ signal reaches -3dB below clipping |
| Channel signal indicator |
LED turns on when post EQ signal reaches -10dB |
| FCL indicator |
input level: -75dB |
LED Level meter
(ST, PFL/AFL) |
2*12 points LED meter (PEAK,+5,+3,+1,0,-1,-3,-5,-7,-10,-15,-20 dB)
PEAK lights if the signal comes within 3 dB of the clipping level. |
Graphic equalizer
(ST OUT) |
9 Band (63,125,250,500,1k,2k,4k,8k,16k Hz), +12/-12 dB Maximum |
| Effect |
16 programs, Parameter control
Foot switch(FC5:Option) Digital Effect ON/OFF |
| Power amplifier protection |
POWER switch on/off mute
DC-fault
Thermal / heatsink temp≥90 & degrees celsius
Vl limiter / RL≤2 ohms
Clip limiter / THD≥1%, Indicator x 2 |
| Power supply protection |
Thermal / heatsink temp≥100 degrees celsius |
| Cooling |
Variable-speed fan ( x 2) |
| Power consumption |
| Japan: |
AC100V 50/60Hz, 500W |
| North America: |
AC120V, 60Hz, 500W |
| Other Areas: |
AC220-240V, 50/60Hz, 500W |
|
Dimensions
(W x H x D) |
444 x 155 x 493 mm |
| Weight |
10.5kg |
