Neumann U 47 FET I | ไมค์สตูดิโอคอนเดนเซอร์ Large-diaphragm Condenser Microphone

ไมค์สตูดิโอ Neumann U 47 FET เป็นไมค์แบบคอนเด็นเซอร์ Large-diaphragm Condenser Microphone, มีรูปแบบการรับเสียงแบบ Cardioid Polar Pattern, 140Hz Low-cut Filter, -6dB Pad, ตอบสนองความถี่ 40Hz-16kHz, Wooden Collector’s Edition Box, and Certificate of Authenticity

U 47 fet Collector’s Edition Condenser Microphone from Neumann is a re-release of this often-copied microphone. A transistorized version of their tube U 47, the U 47 fet features their classic K 47 capsule and boasts a high SPL handling, and has historically found itself at home outside of a kick drum and in front of loud guitar and bass amps, contributing greatly to recordings from the 1960s and 70s. Like the original, there is a slight boost in frequency response around 2 kHz.

The mic features the same low-cut filter as the original at 140 Hz, as well as the selectable -10 dB pad. For additional attenuation, there is a -6 dB output switch, allowing you to hit your mic preamps at a lower level.

Features

• Capture clear, detailed, “radio-ready” sound with this legendary microphone
• Fast transient response is perfect for drums and other percussion
• Wide frequency response captures bass instruments with outstanding power, punch, and focus
• Created using original U47 FET schematics and production notes to bring you the real deal
• High-quality Collector’s Edition wood box and Certificate of Authenticity included

Specifications

• Acoustical operating principle Pressure gradient transducer
• Directional Pattern Cardioid
• Frequency Range 40 Hz ... 16 kHz
• Sensitivity at 1 kHz into 1 kohm 8 mV/Pa = –42 dBV ± 1 dB
• Rated Impedance 150 ohms
• Rated load impedance 1 kohms
• Equivalent noise level, CCIR 1 25 dB
• Equivalent noise level, A-weighted 2 18 dB-A
• Maximum SPL for THD 0.5% 3 137 dB
• Maximum SPL for THD 0.5% with preattenuation 4 147 dB
• Signal-to-noise ratio, CCIR (re. 94 dB SPL) 5 69 dB
• Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 6 76 dB
• Maximum output voltage -3.3 dBu
• Supply voltage (P48, IEC 61938) 48 V ± 4 V
• Current consumption (P48, IEC 61938) 0.5 mA
• Matching connector XLR 3 F
• Weight 710 g
• Diameter 63 mm
• Length 160 mm