Bugera PS1 | Power Soak - Passive 100W Power Attenuator and DI Box
PS1 Power Soak - Passive 100W Power Attenuator and DI Box
Passive 100-Watt Power Attenuator for Guitar and Bass Amplifiers with Emulated Mic Output
Tel: 02-991-8600, 086-514-5515
BUGERA PS1 Power Soak - Passive 100W Power Attenuator and DI Box
The Bugera PS1 Power Soak is a tool quite handy for guitar players looking to crank out their best overdriven sounds at lower volumes. Simply insert the PS1 in the chain between your 100W amplifier and your speaker cabinet, dial in the blistering amp tone you crave, grab hold of the large Soak knob, and bring the level down until you're not annoying your bandmates or neighbors anymore. As you do this, you'll notice that even though your volume decreases, your overall timbre stays the same.
A passive unit requiring no power, the PS1 provides multiple 1/4" connections, giving you the choice of 4-, 8-, or 16-Ohm amplifier inputs. On the rear, you'll find your speaker output jack, as well as a line output that delivers unbalanced signal to any suitable destination. This jack features its own level attenuator, so you can raise or lower the volume as you see fit. The line output passes on the sound of your amplifier head without additional coloration; if you use the XLR output, however, you'll have access to the built-in emulated tone, which offers the convincing sound of a miked cabinet. This can be fed to the engineer during live gigs, or routed to an interface during studio recording. In this way, the PS1 can function as a DI box.
Multi-Impedance Operation
Dedicated Line Output
Built-In Direct Box
- For Electric Guitars & Basses
- Can Handle 100W Amplifiers
- Facilitates Overdrive at Low Volumes
- Attenuates Level Without Tonal Shifts
- Passive Design: Requires No Power
- Doubles as a DI Box
- 1/4" Connections for 4-, 8- & 16-Ohm Amps
- 1/4" Line Output with Level Knob
- Emulated Mic Output for FOH & Recording
Specs
Inputs | 3 x 1/4" amplifier inputs, TS phone type 1 x 1/4" line output, TS phone type 1 X 1/4" speaker output, TS phone type 1 x XLR emulated mic output, balanced |
Input Impedance | 4, 8, or 16 Ohms, depending on connection point |
Dimensions (H x W x D) | 3.6 x 5.0 x 6.8" / 9.1 x 12.7 x 17.3 cm |
Weight | 2.9 lb / 1.3 kg |
แบรนด์ (Brands) | Bugera |
---|---|
รุ่น | PS1 |
จำนวนช่อง (Channels) | 1 Channel |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | BUGERA PS1 Power Soak - Passive 100W Power Attenuator and DI Box |