LAB GRUPPEN E8:2 | เครื่องขยายเสียง 2 แชนแนล 800 วัตต์ 800W Power Amplifier
เครื่องขยายเสียง 2 แชนแนล 800 วัตต์ 800W amplifier LAB GRUPPEN E8:2 เครื่องขยายเสียง 2 แชนแนล 800 วัตต์
LAB GRUPPEN E8:2 | เครื่องขยายเสียง 2 แชนแนล 800 วัตต์ 800W amplifier
- 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- 10-Year Warranty Program*
- Designed and engineered in Sweden
General
Number of amplifier channels |
2 |
Max total output all channels driven |
800 W |
Peak output voltage per channel |
100 V / 70 Vrms |
Max. output current |
16 Arms |
Max output power (all channels driven)
2 ohms |
400 W |
4 ohms |
400 W |
8 ohms |
400 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 200 W) |
16 ohms |
290 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W) |
70 V |
400 W |
100 V |
Can deliver 400 W to a 100 V load tapped at 800 W |
Performance
THD 20 Hz - 20 kHz at 1 W |
<0.1% |
THD at 1 kHz and 1 dB below clipping |
<0.05% |
Signal to Noise Ratio |
>112 dBA |
Channel separation (Crosstalk) at 1 kHz |
>70 dB |
Frequency Response |
2 Hz - 40 kHz |
Input impedance |
20 kOhm |
Common Mode Rejection (CMR) |
50 dB |
Output impedance |
25 mOhm |
Gain, Sensitivity and Limiters
Limit and gain switch defining limit and gain (per channel) |
2 pos: Lo-Z and 70 V |
VPL for 70 V mode |
100 V |
VPL for Lo-Z mode |
56.6 V |
Sensitivity for stated power into 4 Ohm in Lo-Z mode |
4 dBu |
Sensitivity for 70.7 V out in 70 V mode |
4 dBu |
Sensitivity for stated power into 2 Ohm in Lo-Z mode |
1 dBu |
Sensitivity for stated power into 8 Ohm in 70 V mode |
2.1 dBu |
Sensitivity for stated power into 16 Ohm in 70 V mode |
3.7 dBu |
Gain in 70 V mode |
35.2 dB |
Gain in Lo-Z mode |
30.3 dB |
Level adjustment (per channel) |
Rear panel potentiometer, from -inf to 0 dB |
Connectors and Buttons
Input connectors (per ch.) |
3 - pin detachable screw terminals, electronically balanced |
Output connectors (per ch.) |
2 - pin detachable screw terminals |
High pass filter |
Fixed at 50 Hz, switchable per channel |
Power control |
Can be used to go between standby and ON |
GPI (power control input) |
Contact closure type, 2-pin detachable screw terminal, controls the power state |
GPO (power state output) |
Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state |
Cooling |
Single fan, front to rear airflow, no filter required, temperature controlled speed |
Power
Nominal voltage |
100 – 240 VAC |
Operating voltage |
70 – 265 VAC |
Standby consumption |
<1 W |
Mains connector |
IEC inlet |
Dimensions
Dimensions |
W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) |
Weight
Weight |
4.2 kg (9.3 lbs) |
Finish
Finish |
Dark grey aluminum front and black steel chassis |
Approvals
Approvals |
CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star |
แบรนด์ (Brands) | Lab.Gruppen |
---|---|
รุ่น | E82 |
กำลังวัตต์ (Max Power) | 800 Watts. |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | LAB GRUPPEN E8:2 เครื่องขยายเสียง 2 แชนแนล 800 วัตต์ 800W amplifier |