QSC CX1102 | เครื่องขยายเสียง 2 แชนแนล 700 วัตต์
The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system.
ยกเลิกการผลิต
สอบถามข้อมูล
Tel: 02-991-8600, 086-514-5515
QSC CX1102 เครื่องขยายเสียง 2 แชนแนล 700 วัตต์
The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system.
The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers.
CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network.
SPECIFICATIONS | CX1102 |
POWER PER CHANNEL, STEREO MODE, Both Channels Driven | |
8Ω, 20 Hz–20 kHz, 0.05% THD | 700 W |
4Ω, 20 Hz–20 kHz, 0.05% THD | 1100 W |
2Ω, 1 kHz, 1% THD | 1700 W |
70V, 20 Hz–20 kHz, 0.05% THD | 800 W |
70 V, 1 kHz, 0.05% THD | 1000 W |
70 V, 1 kHz, 1% THD | 1200 W |
POWER, BRIDGED MONO MODE | |
16Ω, 20 Hz–20 kHz, 0.1% THD | 1400 W |
8Ω, 20 Hz–20 kHz, 0.1% THD | 2200 W |
4Ω, 1 kHz, 1% THD | 3400 W |
140 V, 20 Hz–20 kHz, 0.05% THD | 1600 W |
140 V, 1 kHz, 0.05% THD | 2000 W |
140 V, 1 kHz, 1% THD | 2400 W |
Noise, 20 Hz–20 kHz | -106 dB |
Input Sensitivity @ 8 ohms | 1.35 Vrms |
Maximum Voltage Gain | 35 dB |
Output Circuitry Class | H, 2-tier |
ALL MODELS | |
Distortion (SMPTE-IM) | Less than 0.02% |
Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
Less than 0.01% THD Less than 0.01% THD |
Frequency Response | 20 Hz–20 kHz, ±0.2 dB |
Damping Factor |
Greater than 500
|
Input Impedance |
6 kΩ unbalanced, 12 kΩ balanced
|
Input Clipping |
10 V rms (+22 dBu)
|
Cooling |
Variable-speed fan, rear-to-front air flow
|
Connectors, each channel |
Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
Output: Safety-shrouded barrier strip |
Amplifier Protection |
Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
Stable into reactive or mismatched loads. |
Load Protection |
On/off muting, DC-fault power supply shutdown
|
Dimensions (HWD) inches |
3.5 x 19 x 14 / 2RU
|
Dimensions (HWD) mm |
89 x 483 x 356 / 2RU
|
Weight |
21 lb (9.5 kg) net
27 lb (12.3 kg) shipping |
แบรนด์ (Brands) | QSC |
---|---|
รุ่น | CX1102 |
จำนวนช่อง (Channels) | 2 Channel |
กำลังวัตต์ (Max Power) | 700 Watts. |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | QSC CX1102 เครื่องขยายเสียง 2 แชนแนล 700 วัตต์ |