PEAVEY IPR2-7500 | เพาเวอร์แอมป์ 2 X 1,550 วัตต์ 8 โอห์ม
เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey IPR2 7500 มีกำลังขับ 1550 วัตต์ RMS x 2 ที่ 8 Ohms, 2800 วัตต์ RMS x 2 ที่ 4 Ohms, 4750 วัตต์ RMS x 2 ที่ 2 Ohms, 2-channel independent, fourth-order Linkwitz-Riley crossovers
**ราคาต่อตัว** (ราคารวม VAT 7% แล้ว)
หมายเหตุ :
- - กรุณาเช็ค Stock สินค้ากับเจ้าหน้าที่ ก่อนสั่งซื้อทุกครั้ง
- - ได้รับสินค้า 2 - 7 วัน (ขึ้นอยู่กับที่อยู่จัดส่ง)
- - หากมีการเปลี่ยนแปลงโปรโมชั่น ทางบริษัทขอสงวนสิทธิ์ในการที่จะไม่แจ้งให้ทราบล่วงหน้า
สอบถามข้อมูล
Tel: 02-991-8600, 086-514-5515
PEAVEY IPR2 7500 เพาเวอร์แอมป์ 2 X 1,550 วัตต์ 8 โอห์ม
เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey IPR2 7500 มีกำลังขับ 1550 วัตต์ RMS x 2 ที่ 8 Ohms, 2800 วัตต์ RMS x 2 ที่ 4 Ohms, 4750 วัตต์ RMS x 2 ที่ 2 Ohms, 2-channel independent, fourth-order Linkwitz-Riley crossovers, DDT protection for trouble-free operation into loads as low as 2 Ωtopology
The Peavey IPR2 7500 2-Channel Power Amp features an advanced design that makes it lightweight while increasing output power, reliability and thermal efficiency. This amplifier is designed with a resonant switch-mode power supply and a high-speed Class D topology that yields a high audio resolution and efficiency. Advanced technology and extensive protection circuitry allow for efficient operation under difficult loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2Ω. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. This amp also features 2-channel independent fourth order Linkwitz-Riley crossovers and a variable-speed fan housed in a lightweight aluminum chassis. The amplifier’s high-efficiency design allows it to operate at very low temperatures without the need for massive heat sinks to cool.
Features
- 2-channel independent, fourth-order Linkwitz-Riley crossovers
- DDT protection for trouble-free operation into loads as low as 2 Ω
- IPR Class D topology
- Detented input controls
- Combination XLR 1/4″ inputs
- 4-pole twist lock output connectors
- Lightweight design
- Individual signal pass 1/4″ jacks on each channel
- LED illuminated
- Standby, LED power present indication
Specifications
Rated Power | 2ch x 2 Ω: 4,750 W 20ms repetitive burst / 3,750 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 2,800 W 20ms repetitive burst / 2,450 W 1% THD / 2,020 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,550 W 20ms repetitive burst / 1,425 W 1% THD / 1,200 W 0.15% THD, both channels driven @ 1 kHz |
RMS Power | 1 x 3,850 W at 2 Ω 1 x 2,400 W at 4 Ω 1 x 1,330 W at 8 Ω 2 x 3,750 W at 2 Ω 2 x 2,022 W at 4 Ω 2 x 1,250 W at 8 Ω |
Minimum Load Impedance | 2 Ω (minimum) |
RMS Voltage Swing | 124 V (maximum) |
Frequency Response | 20Hz – 25kHz; +0dB, -3dB
20 Hz to 20 kHz 2ch x 2 Ω: <0.5% @ 3,280 W 20 Hz to 4 kHz, decreasing to 3,000 W @ 20 kHz, both channels driven |
Input CMRR | > – 75 dB @ 1 kHz |
Voltage Gain | x 40 (+32 dB) |
Crossover | 100 Hz switchable 2nd order high pass and 3rd low pass per channel |
Crosstalk | > -85 dB @ 1 kHz @ 1,000 W power @ 8 Ω |
Hum and Noise | > -106 dB, “A” weighted referenced to rated power @ 4 Ω |
Slew Rate | > 12 V / μs |
Damping Factor | > 200:1 @ 20 Hz to 1 kHz @ 8 Ω |
Input Sensitivity | 2.25 V +/- 3% for 1 kHz 4 Ω rated power, 2.195 V +/- 3% for 1 kHz 2 Ω rated power |
Input Impedance | 20 kΩ, balanced and 10 kΩ, unbalanced |
Current Draw | @ 1/8: 2,210 VA (1,440 W) @ 2 Ω, 1,550 VA (950 W) @ 4 Ω, 982 VA (560 W) @ 8 Ω @ 1/3: 4,260 VA (3,150 W) @ 2 Ω, 3,120 VA (2,160 W) @ 4 Ω, 1,890 VA (1,200 W) @ 8 Ω |
Idle Consumption | 250 VA, 120 W |
Cooling | 3 temperature-dependent variable speed fans |
Controls | 2 front-panel attenuators, crossover select switch for HPF, Normal and LPF |
Indicators | 5 x LED indicators per channel: Active, Signal, DDT, Temperature and DC |
Protection | Thermal, DC, subsonic, incorrect loads, under and over voltage |
Connectors | Inputs: Dual combination 1/4″ XLR Outputs: 2 x 1/4″ thru, 1 x 2-pin & 1 x 4-pin twist-lock connector |
Construction | 0.062″ (0.16 cm) thick aluminum |
Dimensions | 3.5 x 19.0 x 17.0″ (9.0 x 48.3 x 43.2 cm) Handle: 0.6″ (1.5 cm) |
Weight | 14.6 lb (6.6 kg) (without power cord) |
แบรนด์ (Brands) | Peavey |
---|---|
รุ่น | IPR |
จำนวนช่อง (Channels) | 2 Channel |
กำลังวัตต์ (Max Power) | 3,900 Watts. |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | PEAVEY IPR2 7500 เพาเวอร์แอมป์ 2 X 1,550 วัตต์ 8 โอห์ม |