PEAVEY IPR2 2000DSP | เพาเวอร์แอมป์ กำลังขับ 370 วัตต์ RMSx2 ที่ 8 Ohms, 600 วัตต์ RMSx2 ที่ 4 Ohms, 1,100 วัตต์ RMSx2 ที่ 2 Ohms
เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey IPR2 2000DSP มีกำลังขับ 370 วัตต์ RMS x 2 ที่ 8 Ohms, 600 วัตต์ RMS x 2 ที่ 4 Ohms, 1100 วัตต์ RMS x 2 ที่ 2 Ohms, ตอบสนองความถี่ 10 Hz to 30 kHz Variable Fan Cooled, Integrated Protection Circuits Includes Power Cord
ราคาพิเศษต่อต่อฝ่ายขาย
Tel: 02-991-8600, 086-514-5515
PEAVEY IPR2 2000DSP | เพาเวอร์แอมป์ กำลังขับ 370 วัตต์ RMSx2 ที่ 8 Ohms, 600 วัตต์ RMSx2 ที่ 4 Ohms, 1,100 วัตต์ RMSx2 ที่ 2 Ohms
เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey IPR2 2000DSP มีกำลังขับ 370 วัตต์ RMS x 2 ที่ 8 Ohms, 600 วัตต์ RMS x 2 ที่ 4 Ohms, 1100 วัตต์ RMS x 2 ที่ 2 Ohms, ตอบสนองความถี่ 10 Hz to 30 kHz, Variable Fan Cooled, Integrated Protection Circuits Includes Power Cord
The Peavey IPR2 2000 2-Channel Power Amplifier features 2-channel independent 4th-order Linkwitz-Riley crossovers and uses the DDT (Distortion Detection Technique) for virtually eliminating distortion. It features a resonant switch-mode power supply and is designed based on the high-speed IPR class-D topology that yields a high audio resolution and efficiency. The amplifier features detented input controls and speakON output connectors. Not only that, this lightweight amplifier also has individual signal pass 1/4” jacks on each channel.
Features
- 2-channel independent 4th-order Linkwitz-Riley crossovers
- DDT (Distortion Detection Technique)
- Revolutionary IPR class-D topology
- Detented input controls
- speakON output connectors
- Lightweight
- LED illuminated
- Individual signal pass 1/4″ jacks on each channel
Specifications
Power | Rated Watts (2 Channels at 2 Ohms): 1100 W 20 ms repetitive burst / 900 W 1% THD, both channels driven at 1 kHz Rated Watts (2 Channels at 4 Ohms): 600 W 20 ms repetitive burst / 570 W 1% THD / 530 watts 0.15% THD, both channels driven at 1 kHz Rated Watts (2 Channels at 8 Ohms): 370 W 20 ms repetitive burst / 325 W 1% THD / 300 W 0.15% THD, both channels driven at 1 kHz |
Minimum Load Impedance | 2 Ohms |
Frequency Response | Frequency Response: 10 Hz to 30 kHz; ±3 dB at 1 W, 8 Ohms 20 Hz to 20 kHz (2 Channels x 2 Ohms): <0.25% at 650 W 20 Hz to 4 kHz, decreasing to 530 W at 20 kHz, both channels driven 20 Hz to 20 kHz (2 Channels x 4 Ohms): <0.15% at 470 W 20 Hz to 10 kHz, both channels driven 20 Hz to 20 kHz (2 Channels x 8 Ohms): <0.15% at 260 W 20 Hz to 10 kHz, both channels driven |
Input CMRR | > -69 dB at 1 kHz |
Voltage Gain | x 60 (+35 dB) |
Crossover | 100 Hz switchable 2nd order high pass and 3rd low pass per channel |
Crosstalk | > -70 dB at 1 kHz at 250 W power at 8 Ohms |
Hum and Noise | > -105 dB, “A” weighted referenced to rated power at 4 Ohms |
Slew Rate | > 12 V/μs |
Damping Factor | > 170:1 at 20 Hz to 1 kHz at 8 Ohms |
Input Sensitivity | .775 V ±3% for 1 kHz 4-Ohm rated power, .68 V ±3% for 1 kHz 2-Ohm rated power |
Input Impedance | 15 kOhms balanced 7.5 kOhms unbalanced |
Current Draw | Current Draw (at 1/8 Power in VA (W): 540 (315) at 2 Ohms, 370 (185) at 4 Ohms, 240 (115) at 8 Ohms Current Draw (at 1/3 Power in VA (W): 1250 (760) at 2 Ohms, 750 (425) at 4 Ohms, 460 (240) at 8 Ohms |
Idle Consumption | 90 VA, 40 W |
Cooling | Temperature dependent variable speed 3.1″ / 80.0 mm DC fan |
Controls | 2 x front panel attenuators, crossover select switch for HPF, Normal, and LPF |
Indicator LEDs | 5 x LED Indicators per Channel: Active, Signal, DDT, Temperature, and DC |
Protection | Thermal, DC, subsonic, incorrect loads, under voltage, and over voltage |
Connectors | Inputs: Dual Combination XLR-1/4″ / 6.35 mm Outputs: Dual 1/4″ / 6.35 mm signal patch, dual twist lock connectors |
Construction | 0.062″ / 1.575 mm thick aluminum |
Dimensions (W x H x D) | 19.0 x 3.5 x 10.5″ / 482.6 x 88.9 x 266.7 mm Handle: 0.6″ / 15.2 mm |
Weight | 7.12 lb / 3.23 kg |
แบรนด์ (Brands) | Peavey |
---|---|
รุ่น | IPR |
จำนวนช่อง (Channels) | 2 Channel |
กำลังวัตต์ (Max Power) | 1,100 Watts. |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | PEAVEY IPR22000DSP | เพาเวอร์แอมป์ กำลังขับ 370 วัตต์ RMSx2 ที่ 8 Ohms, 600 วัตต์ RMSx2 ที่ 4 Ohms, 1,100 วัตต์ RMSx2 ที่ 2 Ohms |