Neumann KM 185 NI | ไมโครโฟนคอนเดนเซอร์ Small-diaphragm Condenser Microphone

ไมค์จ่อเครื่องดนตรี NEUMANN KM185 เป็นไมโครโฟนแบบคอนเดนเซอร์ Small-diaphragm Condenser Microphone, รูปแบบการรับเสัยง Hypercardioid Pattern,ตอบสนองความถี่ 20 Hz to 20 kHz, High SPL capability, เหมาะสำหรับ acoustic instruments, มี 2 สี นิเกิลและดำด้าน

KM 185 MT Microphone from Neumann is a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast, as well as recording applications.

The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal.

The KM 185 MT is powered via +48V phantom power. Its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 provides attenuation at the off-axis sections of the mic, and is suitable for X,Y and ORTF stereo miking, announcer’s mic for broadcast, spot capturing of drum overheads, strings, wind instruments, percussion, piano, and amp cabinets.

The KM 185 handles sound pressure levels up to 142 dB allowing close miking of instruments high in transient (peak) level response.

Features

• Designed especially to attenuate off-axis sound (lateral and rear) from other nearby instruments
• Great as an XY stereo pair
• Overhead, toms
• Produces especially warm and bass supporting sound for artists who perform in proximity effect range
• Transformerless circuitry
• Trouble-free operation also with unbalanced equipment (e.g., DAT recorders)
• Acoustical operating principle: Pressure/Pressure gradient transducer
• Directional pattern: hypercardioid
• Requires +48V phantom power

Specifications

• Acoustical operating principle Pressure gradient transducer
• Directional Pattern Hypercardioid
• Frequency Range 20 Hz ... 20 kHz
• Sensitivity at 1 kHz into 1 kohm 10 mV/Pa ± 1 dB
• Rated Impedance 50 ohms
• Rated load impedance 1 kohms
• Equivalent noise level, CCIR 1 24 dB
• Equivalent noise level, A-weighted 2 15 dB-A
• Maximum SPL for THD 0.5% 3 142 dB
• Signal-to-noise ratio, CCIR (re. 94 dB SPL) 4 70 dB
• Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 5 79 dB
• Maximum output voltage 10 dBu
• Supply voltage (P48, IEC 61938) 48 V ± 4 V
• Current consumption (P48, IEC 61938) 3.2 mA
• Matching connector XLR 3 F
• Weight approx. 80 g
• Diameter 22 mm
• Length 107 mm