The Mackie ProFX22v3 is a 22-channel mixing console featuring 17 Onyx microphone preamps with 60 dB of headroom and a built-in effects engine with 24 built-in FX, making it well suited for live sound, houses of worship, rehearsal studios, and more. The integrated 2×4 USB audio interface offers high-quality 24-bit / 192 kHz recording and playback with zero-latency monitoring.

     Channels 1-2 offer combo XLR-1/4″ mic/line connections and a Hi-Z switch (for guitar and bass), while channels 3-20 offer XLR or 1/4″ inputs. Channels 1-12 provide single-knob compressors, while channels 1-14 include inserts. Channels 15/16, 17/18, and 19/20 offer two 1/4″ line inputs each (L and R for stereo), while channel 21/22 uses a 3.5mm stereo input.

     Channels 1-22 feature gain controls, a 3-band EQ, three aux sends for monitors, a dedicated FX send, pan, mute, and level faders. Engaging channel 21/22’s USB 3-4 switch will override the 3.5mm input and enable the USB return from a computer.

     Each channel strip includes button selectors for Main L/R, Sub 1-2, Sub 3-4, and PFL SOLO. The master section offers dedicated faders for Main, Sub 1-2, Sub 3-4, and FX. Main output connectors include both XLR and 1/4″, while sub and control room outputs use 1/4″ connectors. A dedicated 1/4″ TRS headphone output includes its own independent level control.

     Other features include an input / USB 1-2 blend control, a dedicated FX output, an FX level fader, and an FX mute, which can also be controlled via the 1/4″ footswitch input.

     The ProFX22v3 features a download for ProTools I First and Waveform software and The Musician’s Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer’s serial number on the website. The Mackie ProFX22v3 includes a USB cable and an IEC cable for powering the unit.

 

Features:

• GigFX effects engine delivers 24 effects including reverbs, delays, and choruses
• 17 Mackie Onyx mic preamps deliver clear signal and 60dB of gain
• Rugged design will stand up to the wear and tear of the road
• 3 Band EQ and 100Hz low-cut filter on all channels
• Built-in channel compression
• 48-volt phantom power on all mic channels
• 24-bit/192kHz A/D for unmatched audio quality
• USB for playback music and recording into your computer
• Balanced XLR and balanced/unbalanced outputs
• Headphone output has separate volume control for comfortable monitoring

 

Specifications

Equivalent Input Noise	150-Ohm Source Impedance, 20 Hz to 20 kHz: Mic In to Insert Send Out, Max Gain -128 dBu
Residual Output Noise	All Outputs, Master Levels Off, All Channel Levels Off: -95 dBu All Outputs, Master Levels Unity, One Channel Level Unity: -85 dBu
Frequency Response	Mic Input to Any Output (Gain at Unity, +0 dB / -1 dB): 20 Hz to 30 kHz
THD+N	22 Hz to 80 kHz Bandwidth: Mic In to Main Out (+4 dBu Output): <0.01%
Attenuation and Crosstalk	Adjacent Inputs at 1 kHz: -90 dB Inputs to Outputs at 1 kHz: -80 dB Fader Off at 1 kHz: -75 dB Mute Switch / Break Switch Mute at 1 kHz: -100 dB
Common Mode Rejection Ratio	Mic In to Main Out, Max Gain, 1 kHz: 70 dB
Maximum Level	All Inputs: +22 dB Main Out XLR: +28 dBu All Other Outputs: +22 dBu
Impedance	Mic In: 3.3 Kilohms Channel Insert Return: 10 Kilohms All Other Inputs: ≥20 Kilohms Phones Output: 25 Ohms All Other Outputs: 120 Ohms Unbalanced, 240 Ohms Balanced
Equalization	All Channels Except 3.5mm Stereo Channel: Low ±15 dB at 80 Hz Mid: ±15 dB 100 Hz to 8 kHz High ±15 dB at 12 kHz Low Cut Filter: 18 dB/octave at 100 Hz
Maximum Voltage Gain	Mic Input Channel to: Insert Output: 60 dB 1/4″ Main Output: 80 dB XLR Main Output: 86 dB 1/4″ Sub Output: 80 dB Aux Output (Pre-Fader): 80 dB FX Send: 90 dB USB Output: 70 dBMono Line Input Channel to: Insert Output: 40 dB 1/4″ Main Output: 60 dB XLR Main Output: 66 dB 1/4″ Sub Output: 60 dB Aux Output (Pre-Fader): 60 dB FX Send: 70 dB USB Output: 50 dB   Stereo Line Input Channel to: 1/4″ Main Output: 20 dB XLR Main Output: 26 dB 1/4″ Sub Output: 20 dB Aux Output (Pre-Fader): 20 dB FX Send: 30 dB USB Output: 10 dB 3.5mm Input to: 1/4″ Main Output: 40 dB XLR Main Output: 46 dB 1/4″ Sub Output: 40 dB Aux Output (Pre-Fader): 40 dB FX Send: 50 dB USB Output: 30 dB USB Input to XLR Main Output: 46 dB
Digital Effects	Number of Presets: 24
Meters	Main L/R Mix: Two Columns of 12 Segments Each: OL, +15, +10, +6, +3, 0 (0 dBu), -2, -4, -7, -10, -20, -30
USB	Format: USB 2.0 I/O: 1 Stereo Input, 2 Stereo Outputs A/D/A: 24-Bit / 44.1, 48, 96, 192 kHz
Phantom Power	48 VDC to All Mic Channels Simultaneously
Power	Universal AC Power Supply: 100 – 240 VAC, 50 – 60 Hz Power Consumption: 45 W
Dimensions (H x W x D)	4.3 x 24.1 x 17.1″ / 10.9 x 61.2 x 43.4 cm
Weight	19.8 lb / 9.0 kg