LAKE LM26 | ดิจิตอลโปรเซสเซอร์ ครอสดิจิตอล ปรับแต่งสัญญาณเสียงดิจิตอล 2-in/6-out Lake Processor Digital
ดิจิตอลโปรเซสเซอร์ ครอสดิจิตอล ปรับแต่งสัญญาณเสียงดิจิตอล LAKE LM26 2-in/6-out Lake Processor Digital อุปกรณ์ปรับแต่งสัญญาณเสียง LAKE LM26 2-in/6-out Lake® Processor, Digital AES3 4-in/8-out 4-in/8-out Dante networked I/O, Crossover, delay and EQ for multi-way loudspeaker systems, 96 kHz internal sampling frequency, 32-bit, Full control via Lake software
**ราคาต่อตัว** (ราคารวม VAT 7% แล้ว)
หมายเหตุ
- - กรุณาเช็ค Stock สินค้ากับเจ้าหน้าที่ ก่อนสั่งซื้อทุกครั้ง
- - ได้รับสินค้า 2 - 7 วัน (ขึ้นอยู่กับที่อยู่จัดส่ง)
- - หากมีการเปลี่ยนแปลงโปรโมชั่น ทางบริษัทของสงวนสิทธิ์ในการที่ไม่ต้องแจ้งให้ทราบล่วงหน้า
Tel: 02-991-8600, 086-514-5515
LAKE LM26 ดิจิตอลโปรเซสเซอร์ ครอสดิจิตอล ปรับแต่งสัญญาณเสียงดิจิตอล 2-in/6-out Lake Processor Digital DSP
อุปกรณ์ปรับแต่งสัญญาณเสียง DSP LAKE LM26 2-in/6-out Lake® Processor, Digital AES3 4-in/8-out 4-in/8-out Dante networked I/O, Crossover, delay and EQ for multi-way loudspeaker systems, 96 kHz internal sampling frequency, 32-bit, Full control via Lake software
Loudspeaker Processor with Raised Cosine EQ and Simultaneous Cross-Platform Parameter Adjustments for Loudspeaker Management and System Control in High-Performance Applications
The LAKE LM 26 provides a two input/six output analog configuration that is ideally suited for multi-way loudspeaker crossover, delay and EQ functions. The LM 26 also provides 4 × 8 AES3 digital I/O and 4 × 8 Dante networked I/O, all with comprehensive signal routing to provide Dante break-in / break-out and failover functionality. Two LM 26 units may be stacked and linked to function seamlessly as a single 4 × 12 processor.
LM 26 provides the ultimate combination of input/output signal flexibility and fail-safe operation. Audio inputs are accepted via the Dante network as well as on connectors for AES3 digital and analog. Simple programming in Lake Controller allows multiple, user-configured automatic switching scenarios.
For example, signals may be distributed over the Dante network, with an AES3 input source failing over to analog – and with the result automatically cascading to all Dante receivers. In addition, the LM Series’ dual-redundant network topology enables seamless switching in case of a problem on one Ethernet link.
In all situations, the LM 26 constantly monitors both the network and all active inputs to detect active audio signals, valid digital clocks, and valid network integrity. If problems are detected, automatic input priority switching ensures that the show will go on.
Features:
- Crossover, delay and EQ for multi-way loudspeaker systems
- Line driver and system EQ for self-powered loudspeaker systems
- Dante break-in/break-out
- Transmission system to and from FOH and stage L /stage R
- 2-in/6-out Lake® Processor
- Raised Cosine Equalization™
- Linear phase and classic crossovers
- LimiterMax™ peak and RMS limiters
- Maximum available delay of 2 seconds
- Analog with Iso-Float™ ground isolation
- Digital AES3 4-in/8-out 4-in/8-out Dante networked I/O
- Gigabit Dual Redundant Dante™ by Audinate® audio networking
- Daylight-readable display
- Dedicated Module Input and Output LED Metering
- Dedicated Module Input and Output mute buttons with LED
- Dynamic buttons and rotary encoder for parameter adjustment
- High quality A/D and D/A 24-bit conversion
- 96 kHz internal sampling frequency
- 32-bit floating point internal data path
- Full control via Lake Controller software application
- Software configurable GPIO
Specifications
Features | |
Module configuration | 2 Contour or 4 Mesa modules |
Channel processing | 6 in Contour mode, 4 in Mesa mode |
Input routers | 8 input routers with 4 priorities in each, seamless failover to lower priorities |
Module input mixer | 4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers. |
Input processing | Raised Cosine Mesa and Ideal Graphic input equalizers |
Output processing | Linear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters |
Features | Delay, Mute, Phase, Gain etc. |
Limiters | LimiterMax with Peak and RMS limiter. Configurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack |
SuperModule compatible | Yes |
Audio Performance | |
Conversion resolution | 24-bit |
Internal Sample Rate / Data path | 96 kHz / 32 bit floating point |
Product propagation delay | Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms Analog (Analog in to Analog out via module) 1.039 ms Pass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms |
Maximum available user delay | 2 seconds |
Analog | |
Inputs and Outputs | 2 inputs, 6 outputs |
Frequency response, digital-to-analog | +/-0.03 dB, 20 Hz to 20 kHz |
Frequency response, analog-to-digital | +/-0.1 dB, 20 Hz to 20 kHz |
THD+Noise, inputs | 0.00024% typical at 1 kHz |
THD+Noise, Outputs | 0.00037% typical at 1 kHz |
Dynamic range, inputs | 116 dB |
Dynamic range, Outputs | 115 dB |
Input impedance | 20 kOhm balanced, 10 kOhm unbalanced |
Common Mode Rejection (CMR) | -74 dB, 20 Hz to 20 kHz |
Crosstalk, inputs | -98 dB, 20 Hz to 20 kHz |
Dante Audio Network | |
Inputs and Outputs | 4 inputs, 8 outputs |
Supported sample rates | 48, 96 kHz |
Support redundant paths | Yes |
Flexible topology | yes |
Device presets | |
Frame presets | 100 |
AES Inputs | |
Inputs and Outputs | 4 inputs, 8 outputs |
Supported resolutions | Up to 24-bit |
Supported sample rates | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
Termination | Selectable |
GPIO | |
Inputs | 2 General Purpose Inputs (GPI) supporting external contact closure |
Outputs | 2 General Purpose Outputs (GPO) with internal contact closure |
Software configurable input control | Standby state, Mute state, Dual preset recall |
Software configurable output indication | Standby state, Mute state, Faults, Ready |
Ethernet | |
Gigabit Ethernet | 1000 Base-T |
Fast Ethernet | 100 Base-Tx |
Back panel Interface | |
Analog Inputs and Outputs | 2 + 6 XLR |
AES Inputs and Outputs | DB-25, with selectable termination |
Ethernet Ports | Dual Neutrik® etherCON® |
GPIO | DB-9 |
Power | Detachable locking 3-pin IEC |
Control and monitoring interface | Via Ethernet for Lake Controller software |
Front-panel user interface | |
Display | Daylight readable monochrome (128 x 64) |
Meters | LED for signal level and clip indicators per channel |
LED Fault and Warning indication | Yes |
Parameter adjustment | Single/multiple parameter edits with rotary encoder |
Standby Power button | On/Standby |
Power | |
Nominal voltage | 100 – 240 VAC |
Operating voltage | 70-265 V AC |
Power consumption | 30 W maximum |
Dimensions | |
Dimensions | 483 mm (19″), 44 mm (1 U), 290 mm (11.5″) |
Weight | |
Weight | 5 kg (11 lbs) |
Finish | |
Finish | Black painted steel chassis with cast alumimum handles |
Approvals | |
Approvals | CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC |
แบรนด์ (Brands) | Lake |
---|---|
รุ่น | LM26 |
ข้อมูลจำเพาะ | LAKE LM26 ดิจิตอลโปรเซสเซอร์ ครอสดิจิตอล ปรับแต่งสัญญาณเสียงดิจิตอล 2-in/6-out Lake Processor Digital |
สินค้า (Products) | Processor เครื่องแต่งเสียง |
จำนวนช่อง (Channels) | 2 Channel |
สี (Color) | สีดำ |