LAB.GRUPPEN FP7000 | เครื่องขยายเสียง 2 แชนแนล 7,000 วัตต์
FP7000 เครื่องขยายเสียง 2 แชนแนล 7,000 วัตต์
LAB.GRUPPEN FP7000 เครื่องขยายเสียง 2 แชนแนล 7,000 วัตต์
- 7,000 Watt, 2-channel amplifier with up to 3,500 Watts output per channel and NomadLink network for monitoring and control
- Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
- 2 x 3,500 Watts into 2 Ohms, 2 x 2,800 Watts into 4 Ohms, 2 x 1,450 Watts into 8 Ohms, 2 x 730 Watts into 16 Ohms
- Proven and reliable Class-TD output stage delivers Class-A/B audio quality with Class-D efficiency
- Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
- Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
- Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
- Efficient Intercooler copper cooling system dissipates more heat for extended peak output
- 2 x balanced analog audio inputs and 2 x link outputs on Neutrik XLR* connectors
- 2 NL4 Neutrik speakON* output connectors
- Removable dust filter grilles for increased air circulation
- Rugged 2U rackmount chassis for durability in touring applications
- 10-Year Warranty Program*
- Designed and engineered in Sweden
General
Number of amplifier channels |
2 |
Peak total output all channels driven |
7000 W |
Peak output voltage per channel |
155 V |
Max output current per channel |
59 A peak |
Max output power (all channels driven)
2 ohms |
3500 W |
4 ohms |
2800 W |
8 ohms |
1450 W |
16 ohms |
730 W |
Max output power bridged
2 ohms |
Not recommended 1 |
4 ohms |
7000 W |
8 ohms |
5600 W |
16 ohms |
2900 W |
Performance
THD 20 Hz - 20 kHz at 1 W |
<0.1% |
THD at 1 kHz and 1 dB below clipping |
<0.05% |
Signal to Noise Ratio |
>112 dBA |
Channel separation (Crosstalk) at 1 kHz |
>70 dB |
Input impedance |
20 kOhm |
Output impedance @ 100 Hz |
19 mOhm |
Gain, Sensitivity and Limiters
VPL, selectable per ch |
155, 121, 101, 83, 70, 56, 47, 38 V |
VPL, when bridged 2 |
310, 242, 202, 166, 140, 112, 94, 76 V |
Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
Amplifier gain selectable (all channels) – rear-panel switches 2 |
23, 26, 29, 32, 35, 38, 41, 44 dB |
Default gain |
35 dB |
Level adjustment (per channel) |
Front-panel potentiometer, 31 position detented from -inf to |
Connectors and Buttons
Output connectors (per ch.) | |
Input connectors (per ch.) |
3-pin XLR, electronically balanced |
Output bridge mode |
A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source |
NomadLink network |
On board, 2 x RJ45 connectors IN and OUT |
Intelligent fans (on/off) |
Yes, depending on presence of output signal |
Power on/off and Remote enable on/off |
Individual switches on front-panel |
Cooling |
Dual fan, front to rear airflow, no filter required, temperature controlled speed |
Front-panel user interface
Common |
NomadLink Network; Power Average Limiter (PAL)4; Power on |
Per channel |
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
Power
Operating voltage, 230 V / 115 V nominal 3 |
130-265 V / 65 -135 V |
Minimum power-up voltage, 230 V / 115 V |
171 V / 85 V |
Power Average Limiter (PAL) 4 |
Yes |
Soft-start / Inrush Current Draw |
Yes / max. 5 A |
Mains connector |
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
Dimensions
Dimensions |
W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) |
Weight
Weight |
12 kg (26.4 lbs) |
Finish
Finish |
Black painted steel chassis with black painted steel / aluminum front |
Approvals
Approvals |
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC |
แบรนด์ (Brands) | Lab.Gruppen |
---|---|
รุ่น | FP7000 |
จำนวนช่อง (Channels) | 2 Channel |
กำลังวัตต์ (Max Power) | 3,500 Watts. |
สี (Color) | สีดำ |
ข้อมูลจำเพาะ | LAB.GRUPPEN FP7000 เครื่องขยายเสียง 2 แชนแนล 7,000 วัตต์ |