LAB GRUPPEN D10:4L | เครื่องขยายเสียงสำหรับระบบประกาศ 4 แชนแนล 1,000 วัตต์

พร้อมส่ง
SKU
D10:4L
ราคาพิเศษ ฿121,600 ราคาปรกติ ฿128,000
  • Free
    Shipping

  • Free Tech
    Support

  • Free Product
    Warranty

   เครื่องขยายเสียงสำหรับระบบประกาศ 4 แชนแนล 1,000 วัตต์ LAB GRUPPEN D 10:4L แอมพลิฟายเออร์ 1,000 วัตต์พร้อมช่องเอาท์พุตที่ยืดหยุ่น 4 ช่อง การประมวลผลสัญญาณดิจิตอล Lake และเครือข่ายเสียงดิจิตอลสำหรับการใช้งานการติดตั้ง

1,000 Watt Amplifier with 4 Flexible Output Channels, Lake Digital Signal Processing and Digital Audio Networking for Installation Applications

LAB GRUPPEN D 10:4L เครื่องขยายเสียงสำหรับระบบประกาศ 4 แชนแนล1,000 วัตต์

   เครื่องขยายเสียงสำหรับระบบประกาศ 4 แชนแนล 1,000 วัตต์ LAB GRUPPEN D 10:4L แอมพลิฟายเออร์ 1,000 วัตต์พร้อมช่องเอาท์พุตที่ยืดหยุ่น 4 ช่อง การประมวลผลสัญญาณดิจิตอล Lake และเครือข่ายเสียงดิจิตอลสำหรับการใช้งานการติดตั้ง

แอมพลิฟายเออร์ 1,000 วัตต์พร้อมช่องเอาท์พุตที่ยืดหยุ่น 4 ช่อง การประมวลผลสัญญาณดิจิตอล Lake และเครือข่ายเสียงดิจิตอลสำหรับการใช้งานการติดตั้ง

1,000 Watt Amplifier with 4 Flexible Output Channels, Lake Digital Signal Processing and Digital Audio Networking for Installation Applications

  • 1,000 Watt amplifier with 4 flexible output channels and up to 1,000 Watts channel output
  • Lake digital signal processing for unparalleled loudspeaker management and system control
  • Integrated 8x8 channels of dual redundant Dante* digital audio networking with AES67 support
  • 4 x 250 Watts into 2 Ohms, 4 x 250 Watts into 2.67 Ohms, 4 x 250 Watts into 4 Ohms, 4 x 250 Watts into 8 Ohms, 4 x 250 Watts into 16 Ohms, 4 x 250 Watts into Hi-Z 25 V, 4 x 250 Watts into Hi-Z 70 V, 4 x 125 Watts into Hi-Z 100 V
  • Proven and reliable IDEEA Class D Output Stage with direct drive 70 and 100 V constant voltage systems as well as low impedance
  • Rational Power Management (RPM) provides total flexibility to allocate available power across all 4 output channels for most efficient use of system inventory
  • Best-in-class Power Factor Correction (PFC) and switch mode power supply reduces running costs and minimizes environmental impact
  • Breaker Emulation Limiter (BEL) with configurable mains current draw threshold and breaker profile to safeguard mains breakers from tripping
  • Configurable Auto Power Down and Adaptive Rail Control enables real world lifetime energy savings
  • Under-Voltage Limiting (UVL) for continued operation during severe mains supply voltage drops
  • Dedicated on-board surveillance and load monitoring for mass notification applications
  • Redundant audio inputs and on-board system surveillance for voice alarm systems
  • CAFE (Configuring Amplifiers For the Environment) software for design, system planning, equipment planning, installation and commissioning
  • Control and monitoring integration with 3rd-party matrix systems including MediaMatrix* and Q-Sys* via dedicated interfacing software
  • Dedicated front-panel mute buttons for each amplifier channel with bicolour LED indication
  • 4 "Lake Class" analog input channels with Iso-Float ground isolation for reliable audio distribution
  • 4 input channels of AES/EBU (AES3) digital audio supporting all standard sample rates up to 192 kHz with 24-bit resolution
  • 2 Neutrik etherCON* RJ-45 ports provide dual redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software
  • Balanced analog and digital audio inputs and amplifier outputs on plug-in Phoenix* connectors
  • Detachable and locking IEC mains cable rated at 250 V / 16 A with variety of wall plugs selectable on order
  • Removable dust filter grille for increased air circulation and simple maintenance
  • Rugged slimline (1U) rackmount chassis including rear support brackets for ease of installation
  • 10-Year Warranty Program*
  • Designed and engineered in Sweden

 

General
Processing / Network

Lake / Dante

Number of amplifier channels

4

Total burst power all channels (share among channels with RPM)

1000 W

Max output power (all channels driven)1
2 ohms

250 W

2.67 ohms

250 W

4 ohms

250 W

8 ohms

250 W

16 ohms

250 W

Hi-Z 25 V

250 W

Hi-Z 70 V

250 W

Hi-Z 100 V

175 W

Max output power single channel (all models)1
2 ohms

850 W

2.67 ohms

1000 W

4 ohms

1000 W

8 ohms

1000 W

16 ohms

600 W

Hi-Z 25 V

500 W

Hi-Z 70 V

1000 W

Hi-Z 100 V

700 W

Amplifier output modules (all models, all channels)
Peak output voltage

142 Vpk

Max output Current

30 Apk

Rational Power Management (RPM)

Share “Total burst power” of the product freely among channels. Any channel can scale up to the “single channel max power”

Default voltage limitation (can be lifted with RPM configuration)

63 Vpk

Protection features

Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection

Amplifier platform
Inter Sample Voltage Peak Limiter (ISVPL)

Configurable Peak voltage threshold and profile

Amplifier gain

Digital configurable amplifier gain 22 - 44 dB

Dynamic range

> 112 dB

Load impedance analysis

Yes

Temperature control

Temperature regulated fans (front-to-rear airflow) and show must go on limitation (ATL, PTL)

Internal Sample Rate / Data path

96 kHz / 32 bit floating point

Product propagation delay AES 96 kHz / analog input

1.61 / 1.68 ms

Lake processing
Loudspeaker processing

Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ - peak and RMS limiters

System tuning

Group control with Raised Cosine™ MESA EG™ asymmetric filters

Input redundancy / Matrix

Automatic 4 level input redundancy / 4 input mixers

System integration

Comprehensive 3rd party protocol over UDP Ethernet

Dante Audio Network
Dante I/O

8 x 8

Network topology / redundancy

Flexible topology / Supports daisy-chained and Dual redundant networks

Sample Rates / Transport

48, 96 kHz / Uni + Multicast

Network latency

0.25, 0.5, 1.0, 2.0, 5.0 ms

AES Inputs
Inputs

4 AES inputs

Supported sample rates / resolution

44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits

Sample rate conversion THD+N 20 Hz - 20 kHz unweighted

0.0000003

Analog Inputs
Inputs

4 high quality inputs with Iso-Float ground isolation

Maximum input / digital reference

+26 dBu / +21 dBu

Sampling rate / Resolution

96 kHz / 24 bit

Input impedance balanced / unbalanced

20 / 10 kOhm

THD+N (typical at 1 kHz unweighted)

0.0000022

THD+N (typical at 20 Hz and 20 kHz unweighted)

0.0000033

Back panel Interface
Analog inputs

4 x Terminal block connectors analog input with +, - and ground

AES inputs

4 x Terminal block connectors analog input with +, - and ground

Output connectors

4 x 2 pole Terminal block connectors rated at 1000 V / 41 A (exceeding amplifier capacity) Can take up to 8 mm2 (8.2 AWG) cables

Ethernet Ports

2 x EtherCon RJ45 Lake Controller, Dante controller and/or DLM (3rd party protocol)

Detachable mains cord

Detachable locking 3-pin IEC rated at 250 V / 16 A

Front-panel user interface
System status indication

3 x tri-color LED. FRAME, TEMP, PSU for device status indication

Channel status indication

3 x tri-color LED per channel. Status indication separated for channel LOAD, AMP, SIGNAL status

Mute

Per channel touch button for MUTE control and tri-color LED for indication

Power

Touch button for ON/STANDBY control and tri-color LED for power state indication

Select

Touch button and LED for bidirectional device software select functionality

Mains Power
Nominal voltage

100 - 240 Volt AC 50 - 60 Hz

Operating voltage

70 - 265 V AC 45 - 66 Hz

Mains wall plug

Selectable on order CEE 7/7 “Schuko” 230 V / 16 A, NEMA 5-15 125 V / 15 A, BS1363-A 250 V / 13 A, IA16A3 250 V / 16 A, AU/NZ 250 V / 10 A, JP 125 V / 15 A, CPCS-CCC 250 V / 10 A

Power supply features
Soft start / Inrush power

Yes

Power factor correction

> 0.98 for mains power > 300 W

Regulated switch mode power supply (R.SMPS)

Yes

Breaker Emulation Limiter (BEL)

No

BEL max current threshold

Fixed 8 A

Power Average Limiter (PAL)

Yes

Under Voltage Limiter (UVL)

Yes

Mains undervoltage and overvoltage protection and mains glitch tolerance

Yes

Dimensions
Rack rail to rear panel

W: 483 mm (19”), H: 44 mm (1 U), D: 425 mm (16.7”)

Overall depth front-rear support

D: 463 mm

Weight
Weight

7.8 kg (17.1 lbs)

Finish
Finish

Black painted steel chassis with grey painted steel front with detachable grille

Approvals
Approvals

CE, ETL (ANSI/UL, CSA), PSE, RCM, BIS, CCC

ข้อมูลเพิ่มเติม
แบรนด์ (Brands)Lab.Gruppen
รุ่น104L
กำลังวัตต์ (Max Power)1,000 Watts.
สี (Color)สีดำ
ข้อมูลจำเพาะLAB GRUPPEN D 10:4L เครื่องขยายเสียงสำหรับระบบประกาศ 4 แชนแนล 1,000 วัตต์
เขียนรีวิวสินค้าของคุณเอง
เฉพาะผู้ใช้ที่ลงทะเบียนแล้วสามารถแสดงความคิดเห็น กรุณา เข้าสู่ระบบ หรือ สร้างบัญชี
คนที่ดูสินค้าตัวนี้ ยังสนใจสินค้าเหล่านี้ด้วย
BOSCH PLE-2CS
BOSCH PLE-2CS
ราคาพิเศษ ฿13,585 ราคาปรกติ ฿14,300