CREST AUDIO VERSARRAY 112 MK ตู้ลําโพงไลน์อาร์เรย์ 2 ทาง 12 นิ้ว 500 -1,000 วัตต์

     The Versarray™ 112 Mk III Passive Ribbon Tweeter Line Source Array speaker system consists of a 12” Neo Black Widow® woofer combined with a Neodymium based Peavey RD™ 2.6 Mk III ribbon tweeter in a cabinet with a simple, quick, yet flexible rigging system. Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Mk III Sub models, the Versarray™ 112 Mk III offers excellent versatility with a very high performance capability. The two-way system consists of the following driver components: a 12” Black Widow® Neo series woofer with Neodymium magnet structure. Capable of over 500W of continuous power handling (AES Std 2-1984), the woofer can handle a lot of sheer power. The high frequencies are handled by two Peavey® RD™ 2.6 Mk3 ribbon tweeters utilizing a composite sandwich ribbon, a Neodymium magnet system, and a low distortion CLEAR FORM™ waveguide.

     Designed to be used in conjunction with a compatible DSP based loudspeaker signal processor, such as a Peavey Digitool™, Nion® or MediaMatrix® system, with the Peavey factory settings in use, the Versarray™ 112 Mk III can perform to modern standards of excellence, and handily exceed the competitions audible performance.

     The FlyQWIK™ fully articulated hardware rigging system provides for a classic straight line-array configuration, or a number of different angling options, providing easy aiming of the system. Angles between the array modules is adjustable from 0 degrees (straight), to 15 degrees in 2.5 degree increments. Total angle possible between two cabinets is 15 degrees. 

     Quick-lock pins are supplied with the rigging hardware to couple the Versarray™ 112 Mk III modules together and lock the angles between them into place, as well as for the rigging halo and fly bar configurations of a line array. The flexibility of the Versarray™ system allows the use of anywhere from 1 to 10 Versarray™ 112 Mk III modules in conjunction with Versarray™ 218 Mk III Subs. An optional special groundstack bracket set mounts to the Versarray 218 Mk III Sub, and allows up to three of the Versarray™ 112 Mk III ‘s to be mounted on top of the Versarray 218 Mk III Sub, and angled upward, for use on stage in a stadium seating situation.

Features

• 2-way Bi-Amp Ribbon Line Source Array SR System
• 12” Neo Black Widow® 4” VC Woofer
• 1000 watt program, 2000 watt peak power handling
• Ribbon Tweeters with Neo magnet and composite material sandwich ribbon
• Ribbon Tweeters mounted to our proprietary CLEAR FORM™ Waveguide
• 90 H by 15 V degree coverage pattern (per one cabinet)
• Easy aiming FlyQWIK™ hardware rigging system
• Angle adjustable in 2 1/2 degree increments, from 0 to 15 degrees total angle between adjacent cabinets
• Sound Guard™ tweeter protection, series capacitor for reliability
• Inputs are two Neutrik® Speakon® 4 pin jacks in parallel
• 18 mm 13 ply Baltic Birch enclosure with steel inner brackets
• Injection molded cabinet end caps, made from high impact material.
• Hammerhead™ polyurea black finish and black powder-coated cloth lined grilles

SPECIFICATIONS

• Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 100 Hz to 20 kHz (±3 dB, with processing)

• Usable Low Frequency limit, -10 dB point: 85 Hz (with processing)
• Power Handling: Low Frequency Section: 500 W continuous 1,000 W program 2,000 W peak
• High Frequency Section: 120 W continuous 240 W program 480 W peak

Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:

• Low Frequency Section: 97 dB SPL, (2.83 V input)
• High Frequency Section: 101 dB SPL, (4.0 V input for 16 ohm wiring)

Maximum Sound Pressure Level (1 meter) * :

• Low Frequency Section: 124 dB SPL continuous 130 dB SPL peak
• High Frequency Section: 122 dB SPL continuous 128 dB SPL peak

*Note: This spec is for one module at 1 meter, a line array of 6 units has much higher output at distance due to line source effect where SPL falls off at 3 dB per distance doubling rather than 6 dB

*Note: This spec is for one module at 1 meter, a line array of 6 units has much higher output at distance due to line source effect where SPL falls off at 3 dB per distance doubling rather than 6 dB

Transducer Complement:

• Low Frequency Section: 1x 12 in. Woofer, 1244 Neo Black Widow® 4” VC Woofer, in a sealed box
• High Frequency Section: 2x 4.75 in. Ribbon Tweeters Two RD™ 2.6 Mk III Peavey Ribbon Tweeters, on a waveguide
• Box Tuning Frequency (Sealed): Low Frequency Section: 88 Hz

Electroacoustic Crossover Point, Peavey Active Digital Crossover:

• (Applies to VSX™, Digitool® and Nion®/ MediaMatrix® settings provided by Peavey)
• Sub – Low Frequency: 125 Hz at 24dB/ octave
• Low Frequency – High Frequency: 1950 Hz at 24dB/octave
• Recommended Active Crossover Frequency Region and Slope: Sub –Low Frequency: 125 Hz at 24dB/octave LR Low Frequency –High Frequency: 2000 Hz at 24dB/octave LR

Impedance (Z):

• Low Frequency: Nominal: 8.0 Ohms, Minimum: 6.5 Ohms
• High Frequency: Nominal: 16 Ohms, Minimum: 13.6 Ohms

(Special Note: Ribbon tweeters are capacitor coupled so use with switching amps is allowed.)

• Input Connections: 2x Neutrik® 4-pin Speakon® jack
• Enclosure Materials & Finish: 18 mm 13 ply Baltic Birch plywood finished in a tough Hammerhead™ polyurea black finish, with injection molded end caps and horn, with a perforated steel grille finished in black powder coat paint and a cloth liner inside. Inner steel frame and backing plates for rigging hardware.
• Enclosure Materials & Finish: 18 mm 13 ply Baltic Birch plywood finished in a tough Hammerhead™ polyurea black finish, with injection molded end caps and horn, with a perforated steel grille finished in black powder coat paint and a cloth liner inside. Inner steel frame and backing plates for rigging hardware.

Dimensions (H x W x D):

• Front: 15.13 in. x 25.06 in. x 15.19 in. 384 mm x 637 mm x 386 mm
• With Rigging hardware and Pins: 15.13 in. x 27.13 in. x 16.75 in. 321 mm x 689 mm x 426 mm
• Net Weight: 66 Lbs. (30.0 kg)

{includes all cabinet associated rigging hardware for each cabinet, including quick-lock pins, etc.}

Companion Subwoofers (sold separately): Versarray™ 218 Mk III Sub double 18” Lo Max® woofer subwoofer

Optional Accessories:

• 3 foot speaker cable, with 16 gauge 4 conductor wires with 4-pin to 4-pin Neutrik plugs (Peavey part number 00585240); and 10mm Quick Release Positive Lock Pins for array rigging

Flying/Rigging Options:

• Versarray™ Mk III HALO
• Versarray™ Mk III FLY BAR, 6FT LENGTH
• Versarray™ Mk III SUB SUPPORT FRAME
• Versarray™ Mk III FLY BAR, 2FT LENGTH