Configuration |
Compact two way, ported enclosure |
Transducers Low Frequency Transducer
High Frequency Transducer |
Dual 8-inch high power, treated paper cone, 2-inch voice coil, neodymium magnet
1-inch high output compression driver |
Frequency Range1 Frequency Response (-6 dB) Useable Frequency Range (-10 dB) |
80 Hz - 27.7 kHz 60 Hz - 29.5 kHz |
Maximum Output (SPL at 1 m)2 Fullrange (passive mode) LF (biamp mode) HF (biamp mode) |
Continuous |
Peak |
120 dB |
126 dB |
124 dB |
130 dB |
121 dB |
127 dB |
|
Nominal Impedance Passive LF HF |
8 ohms 8 ohms 8 ohms |
Power Rating3 Passive LF HF |
450 W (IEC 8 hours) 500 W (IEC 8 hours, 50 Hz - 2 kHz) 45 W (IEC 8 hours, 2 kHz - 20 kHz) |
Recommended Max Amp Power (Passive) |
900 W RMS |
Sensitivity (SPL, 1 W at 1 m)4 Passive LF HF |
93 dB (100 Hz - 10 kHz) 97 dB (200 Hz - 2 kHz) 104 dB (2 kHz - 10 kHz) |
Nominal Coverage |
90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) |
Bass Loading |
Ported, tuned to 60 Hz |
Transformers (AD-S282HT)
|
Type |
Custom low distortion laminated core, wide bandwidth design |
Taps |
70V 200, 100, 50, 25 W; 8Ω bypass 100V 200, 100, 50 W; 8Ω bypass |
Enclosure
|
Material |
Injection molded, weather resistant, high impact polystyrene |
Finish |
White or black (paintable) |
Weather Resistant |
Yes |
Grille |
Heavy duty powder coated aluminum |
Connectors |
Barrier strip, (switchable: passive/active on AD-S282H) |
Mounting Hardware |
Yoke mount (included) |
Weight |
27.7 lb (12.6 kg) net 35.6 lb (16.1 kg) shipping |